PENGARUH PENAMBAHAN ADITIF DAUN JAGUNG (Zea mays L.) TERHADAP SIFAT FISIS DAN MEKANIK KERAMIK ALUMINA

Ayu Dwi Retno, Ety Jumiati, Ridwan Yusuf Lubis

Abstract


Research has been carried out on the manufacture of alumina ceramics. This study aims to determine the effect of the addition of corn leaf additives on the physical and mechanical properties of alumina ceramics. Variations in the composition of alumina and corn leaf ash are: 95% : 5%; 90% : 10%; and 85% : 15%. The process of making these ceramics uses the die prissing method, and uses variations in firing temperature, namely 1300°C  and 1400°C for 1 hour, and is printed using a 3 × 3 × 1 cm3 mold. the characterization of the tests carried out included physical properties, namely density and porosity and mechanical properties, namely hardness.  The  results of the data obtained from  measuring  the  density  at 1300°C are 2.11 – 2.18 g/cm3 and at 1400°C they are 2.13 – 2.20 g/cm3, the porosity at 1300°C is 25.82% – 27.25% and 1400°C temperature of 25.36% – 26.89%, and 1300°C temperature hardness test of 59.641 MPa – 67.055 MPa and 1400°C temperature of 61.926 MPa – 70.958 MPa.

Keywords


Alumina Ceramic; Ceramic; Corn Leaves

References


1. Bahtiar. (2016). Pengaruh variasi komposisi terhadap densitas dan kekerasan pada manufaktur keramik lantai. Skripsi Fisika, Universitas Alauddin Makassar.

2. Sidabutar, T. E. (2017). Pembuatan dan karakterisasi keramik magnesium alumina silika dari abu vulkanik gunung sinabung. Jurnal Teknik Mesin (JTM), 6(1), 28–35.

3. Nasrun, M., & Sujianto, S. (2020). Pembuatan dan pengujian sifat fisis dan sifat mekanik keramik alumina sebagai komponen mekanik. Teknika: Jurnal Sains dan Teknologi, 16(2), 249–254.

4. Lumbanbatu, D. F. (2017). Pembuatan dan Karakterisasi Keramik Alumina dengan Aditif Glass Bead. Skripsi Fisika, Universitas Sumatera Utara.

5. Muhadjir, F. (1988). Budidaya Tanaman Jagung. Bogor: Badan Penelitian dan Pengembangan Pertanian.

6. Simbolon, E. S. M. (2020). Pengaruh Penggunaan Abu Daun Jagung Terhadap Kuat Tekan Beton. Skripsi Fisika, Universitas Sumatera Utara.

7. Pinem, P. (2020). Efek penggunaan abu daun jagung (yang sudah diperhalus) terhadap kuat tekan dan kuat lentur beton. Skripsi Fisika, Universitas Sumatera Utara.

8. Mawardani, P. (2014). Pengaruh Kemurnian Bahan Baku Alumina Terhadap Temperatur Sintering dan Karakterisasi Keramik Alumina. Skripsi Fisika, UIN Syarif Hidayatullah.




DOI: http://dx.doi.org/10.31258/jkfi.20.3.275-278

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Indexing by:

  

 

Image