PEMISAH AIR DAN CRUDE PALM OIL DENGAN METODE ADSORPSI MENGGUNAKAN SENSOR WARNA TCS3200 DAN SENSOR PHOTODIODE BERBASIS ARDUINO UNO

Muhammad Iqbal Zailany Nasution, Mulkan Iskandar Nasution

Abstract


To lessen financial damages brought on by industrial mishaps, a device that can recycle or reuse oil emissions mixed with water is required. The purpose of this study was to evaluate the sensor readings for crude palm oil (CPO) oil thickness, presence, and tool effectiveness in separating CPO oil from water. photodiode and the tool's effectiveness in separating the water and oil in CPO. The red frequency value on the TCS3200 color sensor reading increases as the thickness of the oil in the tank increases. The percentage deviation value of the CPO oil volume generated from these results is 9.7%. Before suction or the laser still penetrates the water, the photodiode sensor's light intensity reading is 74, and when it is exposed to oil, the reading is 0. The CPO oil thickness test findings show that as the CPO oil thickness increases, so does the red frequency value on the sensor. The photodiode sensor's laser light reception intensity is 74 when it detects water, and 0 when it detects oil. According to test data, the gadget has a 90.3% success rate in separating water and oil.

Keywords


CPO Oil; TCS3200 Color Sensor; Photodiode Sensor

References


1. Adiarso. (2019). Outlook teknologi pangan 2019. Tanggerang: PPIPE.

2. Dihni, Vika Azkiya. (2022). Konsumsi minyak sawit terus meningkat dalam lima tahun terakhir. Diakses pada 22 Mei 2022, https://databoks.katadata.co.id/datapublish/2022/02/03/konsumsi-minyak-sawit-terus-meningkat-dalam-lima-tahun-terakhir.

3. Daton. (2022). Sungai mahakam tercemar CPO 7 kilometer ke hilir. Diakses pada 22 Mei 2022, URL: https://kaltim.prokal.co/read/news/385102-sungai-mahakam-tercemar-cpo-7-kilometer-ke-hilir.html.

4. Astuti, Widi. (2018). Adsorpsi menggunakan material berbasis lignoselulosa. Semarang: UNNES Press.

5. Suhaeb, Sutarsi. (2017). Mikrokontroler dan Interface. Makasar: UNM.

6. Bere, S., Mahmudi, A., & Sasmito, A. P. (2021). Rancang bangun alat pembuka dan penutup tong sampah otomatis menggunakan sensor jarak berbasis Arduino. JATI (Jurnal Mahasiswa Teknik Informatika), 5(1), 357–363.

7. Yusro, Muhammad & Aodah Diamah. (2019). Sensor & transduser teori dan aplikasi. Jakarta: UNJ.

8. Nyayu, L. H., Rasyad, S., Putra, M. S., Hasan, Y., & Al Rasyid, J. (2019). Pengaplikasian sensor warna pada navigasi line tracking robot sampah berbasis mikrokontroler. Jurnal Ampere, 4(2), 297–306.

9. Winingsih, P. H. (2015). Rancang bangun laser untuk pembelajaran optika dalam menentukan indeks bias dan difraksi kisi. Science Tech: Jurnal Ilmu Pengetahuan dan Teknologi, 1(1), 77–82.

10. Saputra, B. A., Rivai, M., & Tasripan, T. (2019). Rancang bangun sistem pemisah air–Minyak berbasis metode adsorpsi menggunakan mikrokontroler Teensy. Jurnal Teknik ITS, 7(2), A300–A305.




DOI: http://dx.doi.org/10.31258/jkfi.20.2.165-170

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Indexing by:

  

 

Image