PENGUKURAN NILAI INDUKTANSI PELAT ALUMINIUM BERDASARKAN VARIASI KAPASITANSI MENGGUNAKAN MODUL EVB LDC 1000

Cinryani Cinryani, Lazuardi Umar, Salomo Salomo, Maksi Ginting

Abstract


The method that has been done in metal thickness measurement is a plate thickness measurement method using an eddy current based sensor. Eddy current sensors can measure the thickness of non-magnetic metal layers through an inductance relationship with variations in thickness where the thickness used for Cu is 0.4 mm, 0.9 mm, 1.5 mm, 2 mm, 4 mm, while Al is used ie 0.4 mm, 0.5 mm, 1 mm, 1.2 mm, 1.5 mm, 1.8 mm, 2 mm, 2.2 mm, 4 mm, 5 mm with a single frequency of 1 Hz with a capacitance value of C0 5 pF. The inductance vs. thickness curve for aluminum and copper has an exponential relationship. The distance between the sensor and non-magnetic material is kept constant at 2 mm. Variations in the value of capacitance C0 used in the measurements are then varied to 100 pF, 200 pF, and 300 pF to see the effect of inductance on the thickness of the plate as a function of the capacitor (C) oscillation.


Keywords


Sensors; Flat Coils; Evaluation module of LDC 1000 board; Eddy current; Copper; Aluminum

Full Text:

PDF (INDONESIA)

References


Du, W. (2014). Resistive, Capacitive, Inductive, and Magnetic Sensor Technologies. Boca Raton: CRC Press.

Horsky, P. (2005). LC Oscillator Driver for Safety Critical Applications. Proc. of DATE 05 Conference, Munich, Designers Forum, Germany, 5 Maret 2005, 34-38.

Decker, W. & Kostka, P. (1989). Inductive and Eddy Current Sensors. In: Gopel, W., Hesse, J. and Zemel, J. N. (Eds.), Sensors: A Comprehensive Survey. Weinheim: VCH.

Benson, H. (1991). University Physics. U.S. America: John Wiley & Sons.

Wilson, J. S. (2005). Sensor Technology Handbook. Newnes, Elsevier, USA.

Malik, U., Setiadi, Rahmondia, N., & Umar, L. (2015). Sensor Planar Induktif Berbasis Bahan PCB FR-4 Untuk Pengukuran Jarak Kecil. Prosiding Seminar nasional Fisika Universitas Andalas (SNFU) 8 Oktober 2015, Padang, Sumatra Barat.

Texas Instrumen. (2014). LDC1000/LDC 1041/LDC1051 Evaluation Module. Diakses pada 14 Maret 2019, URL: http://www.ti.com/lit/pdf/snau150.

Mohan, S. S., del Mar Hershenson, M., Boyd, S. P., & Lee, T. H. (1999). Simple Accurate Expressions for Planar Spiral Inductances. IEEE Journal OF Solid-state Circuits, 34(10), 1419-1424.

Halliday, D., Resnick, R., & Walker, J. (1989). Fundamental of Physics. Canada: John Wiley & Sons INC.

Jiles, D. (2015). Introduction to magnetism and magnetic materials. France: Taylor and Francis GroupCRC Press.

National Instruments. (2016). USB Instrument Control Tutorial. N.p., n.d. Web. Diakses pada 22 Maret 2019, URL: http://www.ni.com/tutorial/4478/en/.




DOI: http://dx.doi.org/10.31258/jkfi.17.1.24-29

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Indexing by:

  

 

Image