SIMULASI POLA ALIRAN FLUIDA DALAM DAERAH DENGAN BATAS TIDAK TERATUR MENGGUNAKAN METODE ELEMEN HINGGA
Abstract
Research of ideal fluid flow on irregular domain by variation mesh has been done. Laplace equation was used to model velocity potential and the gradient was used to velocity. Boundary condition for inlet was chosen to be 15 , while for outlet was 30 and Neumann boundary condition on lateral side. The developed model shows that uniform flow was happened on straight channel and free vortex on the curved one. The analytical and computational calculation has similar results, that is 23.7787 and 23.7792 The percentage of the difference is 2.8 wich is very small, therefore this method is accurate enough to model pattern of ideal fluid flow on irregular domain.
Keywords
Full Text:
PDF (INDONESIA)References
Kuntjoro, H, D., Pudiastuti, & Saptarita. (2011). Studi literatur koreksi model matematis aliran di lengkung sungai. Jurnal Aplikasi, 1-14.
Munson, B. R., Young, D. F., & Okiishi, T. H. (2003). Mekanika Fluida. Jakarta: Penerbit Erlangga.
Kosasih, P. B. (2012). Metode Elemen Hingga . Yogyakarta: Andi Yogyakarta.
Dutt, A. (2015). Effect of mesh size on finite element analysis of beam. SSRG International Journal of Mechanical Engineering, 8-10.
Mustain, M. (2011). Mekanika Fluida. Surabaya: ITS Press.
DOI: http://dx.doi.org/10.31258/jkfi.16.1.70-74
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Indexing by: