PENGOLAHAN ISYARAT METODE DIFERENSIAL UNTUK LINIERISASI SENSOR KOIL DATAR

Kisna Pertiwi, Usman Malik, Defrianto ', Lazuardi Umar

Abstract


Sensor induktif koil datar mengevaluasi perubahan induktansi bersama dari objek ukur pada kumparan. Koil geometri lingkaran bekerja dengan mendeteksi tanpa kontak fisik dengan objek tersebut yang dibuat pada FR4 Printed Circuit Board (PCB). Osilator LC digunakan untuk mengevaluasi perubahan induktansi dari dua sensor identik dalam struktur diferensial dengan massa penganggu, yaitu tembaga berilium (Cube) bergerak maju mundur antara sensor. Batas pengukuran dengan jarak minimum diperoleh frekuensi sebesar 3,45MHz untuk sensor koil datar 1 dan 2,41MHz untuk sensor koil datar 2. Linierisasi menunjukkan sensitifitas suatu sensor dengan nilai dua kali dari sensitifitas satu sensor.

Keywords


Sensor koil datar; Osilator LC; Linerisasi sensor

Full Text:

PDF (INDONESIA)

References


Areny, Ramon P., Webster, Jhon G. 1991. Sensors and Signal Conditioning. John Willey and Sons Inc. Canada.

Bosch, 2007. Sensors – the vehicle’s Sensory System. Technical Information. Bosch Gmbh, Germany.

Decker, W., Kostka, P. 1989. Inductive and eddy current sensors. Sensors: A Comprehensive Survey. Chapter 7. 5: 300–304.

Malik, Usman., Setiadi, Rahmondia N., Umar, Lazuardi. 2015. Sensor Planar Induktif Berbasis Bahan PCB FR-4 Untuk Pengukuran Jarak Kecil. Prosiding Seminar nasional Fisika Universitas Andalas (SNFU). Padang.

Setiadi, Rahmondia N. 2009. Desain dan Pembuatan Sensor Getaran Frekuensi Rendah Berbasis Koil Datar. Thesis S2. Intitut Teknologi Bandung: Bandung.




DOI: http://dx.doi.org/10.31258/jkfi.13.12.807-813

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Indexing by:

  

 

Image